App Building Guidelines
An Alteryx analytic app is a self-contained program that performs a specific function for the user. The interface must be simple and the app designed with a single goal in mind. The app should perform a limited range of tasks, focused on an optimal user experience. Considering that users are running the apps you are building in a web browser, the back-end design needs to be clever, elegant and efficient.
Most Recent Vintage dataset
When authoring an App which uses a specific dataset, the selected dataset should be set to use the Most Recent Vintage version of the dataset. This means that Designer automatically uses the latest version of the dataset that is installed on the user’s computer. This applies to Demographic Analysis tools (Allocate), Behavior Analysis tools (Solocast), Calgary tools, Drivetimes, Geocoder or for the Reference Base Map in the mapping tool. To set the dataset, go to Options > User Settings > Edit User Settings > Dataset Defaults.
Meta info tab
Information filled in on the Meta Info tab of the Workflow configuration window displays in the App details on the web.
- Use File Name to present the name of the file. Alternatively, select Custom: to give the App a ‘friendly’ name. For example, the App file itself may be called Download_Weather_Data then the custom name would be the same but without the underscores, Download Weather Data.
- Description: The description that is entered here will be the description that gets shown on the web for the app, so please make sure it is an accurate description and is user friendly.
- URL: The URL field provides the ability to include a link to an external website.
- Author: Provide the details of the Analytic Application creator, including Name, Vintage (YYYY.Qtr), Company, and Copyright.
When authoring an app, make sure you have saved the file as an .yxwz file even if you changed the workflow type to Analytic App. If the file extension is left as a .yxmd, it will open as a workflow and not as an App.
Apps created in version 9.0 can no longer be saved as .yxmd files.
The Map Input tool gives the App consumer the ability to select a location or draw a polygon or line using the map input feature. Map questions should be short but descriptive and a base map should always be used. When choosing a base map, make sure you select Most Recent Vintage.
Finally, if Draw mode is selected, ensure User Can Label Features is always checked. This gives the user the option to add a name to each of their custom polygons.
When saving an App to the Gallery, if the output of the report is rendered as PCXML, the application provides the option for the end users to not only preview the report on the web, but to also download the report in any of our supported report formats. Supported report formats include; PDF, Microsoft Word, Microsoft Excel and HTML.
When authoring an App the output can be any of our supported report formats, to utilize PCXML set the Output Mode in the Render tool to Choose a Specific Output File, and for the Output File, use
When previewing a report in PCXML you will not see footers, but they will be available when downloaded as a PDF, Word, or Excel document.
Read/write files: Macros in an app
For web Apps you will only be able to read and write to files that are within the same folder as your App or a lower down folder, i.e. any folder that is within the folder that contains the app. (Can be more than 1 level down.) This rule will also apply to Macros that you wish to use for your App, unless it is a standard macro which is part of the Alteryx product installer or a data installer.
Do not use
%temp% to write to the temp directory when building workflows or apps to be saved to the Gallery. Keep all file paths within the workflow. If developing a chained app, use only the file name rather than any file path, e.g.,
.\fileOutput.yxdb and not
%temp%\fileOutput.yxdb or something similar. Select a file by browsing to it and then change the file dependency path to a relative path using the Workflow Dependencies window.
Prohibited tools and events
The following Alteryx Designer tools and events are prohibited in the Alteryx Public Gallery (gallery.alteryx.com) (also known as the Analytics Gallery) due to the numerous possible configurations and the actions that can be performed:
If your workflow uses one of the prohibited tools or events in a safe manner, you can apply for an exemption to run the workflow in the Alteryx Analytics Gallery. To apply for an exemption:
- Email email@example.com and explain how and why each prohibited tool is used, along with the general purpose of the workflow.
- Publish the workflow in your Private Studio and check the option Others may download this workflow.
- Add the workflow to a Collection and share it with the Alteryx Curator at firstname.lastname@example.org.
- Allow up to two business days for your workflow to be reviewed and an Alteryx Curator to email you the status of your request.
The Predictive Macros included with Designer which use the R tool are allowed in the Alteryx Public Gallery.
Unsupported app features for web
The following are not supported in the Analytics Gallery web environment.
- Folder Browse
- File Browse (Save as). Upload works fine on the web.
- If an App throws any errors in the Desktop environment, it will not be able to be saved to the Gallery.
Best practices for building apps
When using the Action tool to Update/Change Value, unless actually needed, don’t use the ‘Replace a specific string:’ option. If you change the tool configuration in your workflow due to continued development, you may end up breaking that action tool, because that specific string may no longer exist. Obviously there will be times when you need to use that option but just bear in mind that if you change that string in the tool then you may need to also update the action tool.
If you are using an Action tool to update a Detour tool, try to be complete and update the detour for both possibilities, i.e. detour left and detour right. Otherwise if you just update for the one condition and you change the workflow while developing then you haven’t accounted for when you need the workflow to go the other way.
All detours must end, especially before joining any data streams from a detour to anywhere else in the workflow. A Detour End tool requires no configuration, so is easy to use. Make sure you use them, or end the detour with an Output tool.
Use the Error Message tool
When writing questions, consider your user by anticipating common mistakes. You should be issuing error messaging using an Error Message tool. For example if the user must select an option, then throw an error when they don’t select anything, this can avoid the engine throwing errors which may not be meaningful enough to the user to understand how to fix an error. Ideally have a throw error for every question that the user needs to fill in. You can also do more complex conditions to make sure they have filled things in correctly. For example, if they need to fill in a text box with up to 5 trade areas separated by commas (for example 1, 2, 3, 4, 5), you could use a regex condition to make sure there aren’t more than 4 commas in the text box.
Issue errors with the Message tool
Along these same lines, try to anticipate cases where the App may fail even when configured properly. For instance, the user may enter in an address that fails to geocode and renders no results. You can easily handle messaging in your App by Filtering bad geocodes and then use the Message tool to return a message to the user: "The address you have provided did not geocode. Please check the address is valid and make appropriate changes to it or enter a different address and re-run."
Update raw XML, escape HTML metacharacters
If you are updating raw xml for a tool or using special characters in your Apps, bear in mind that on the web this may not work as anticipated. For example a Drop Down tool or List Box tool selection on the engine could contain text such as:
Age By Sex Summary Report:<Report Type=”summary”>Age By Sex Summary Report</Report>
But when this is used on the web it will not actually display the question correctly and therefore when this gets used in an action it will probably not have the desired effect. A solution is to change the text to be:
Age By Sex Summary Report:<Report Type="summary">Age By Sex Summary Report</Report>
Then if you are using the question response in an action you will need to update it to be:
The Escape XML Metacharacters function was added to the Formula Library in version 8.0. You can access it from the Specialized category. This function will replace all XML metacharacters with their escaped versions.
Allocate variable trees
The web and the engine return different values when an Allocate variable tree is left empty. If the App has an Allocate variable tree as a question type then you may want to write a condition which checks if the user selected anything or left this empty. For the engine you could write something like:
[AllocateVariables] == "<Variables />"
When the variable tree has nothing selected,
<Variables /> is returned. However on the web the value returned is actually nothing, so you would need the condition to be:
Obviously we want the Apps to work on both the web and the desktop so the condition actually needs to be:
[AllocateVariables] == "<Variables />" or isempty([AllocateVariables])
If we are also worried about using the <, >, and / characters on the web then we could change the condition to be:
REGEX_CountMatches([AllocateVariables], "Variables") == 1 or isempty([AllocateVariables])
It is best to keep a manually configure Union tool out of any App because in most cases, the workflow changes at runtime. Instead of configuring the Union tool in manual mode, insert Select tools into each connection feeding into the Union tool. When configuring the Select tool, rename and reorder fields as necessary taking proper care to not include Dynamic/Unknown fields. Configure the Union tool using either Auto Config by Name or Auto Config by Position.
Tool containers and app organization
App organization is done in part by using different tool containers for different sections of the app. For example, all the reporting tools are typically the last section of an App, and could be placed in a tool container labeled "Reporting".
A Tool Container tool can be color coded based on the function it is highlighting. Color-coding tool containers make it easier to understand what an app is doing, especially when viewed at a small zoom. This is helpful when troubleshooting or de-bugging an app that someone else has authored.
Interface tools should be placed in their own containers and color coded as such. For multi-tabbed apps, it is helpful to place the tools that make up each tab in their own container.
Annotations for workflows and apps
Annotations are text boxes that are attached to a specific tool and can be very helpful in describing the role for individual tools. One major benefit is if you move the tool, the annotation moves with it. Under the Workflow configuration, set Annotations to show.
If needed, you can also set individual annotations to be placed on either the top or bottom of a tool. To change the Annotation, click on the tool, select the Annotation tab, and select or deselect Place Annotation on the Top.
Macro specific guidelines
All previous guidelines apply to Macros as well as Apps, with the following exceptions that apply only to Macros.
A Macro Input tool should include data. The inclusion of data makes it so much easier to troubleshoot or debug if something goes wrong. There is a text input embedded inside the Macro Input tool. This is the preferred method for macro inputs. If you need a bigger file to serve as the data input, it should be included with the macro where possible. Data file dependencies for a macro should be named following the pattern:
Input and Output Names should not have a tool number associated with them. From the Macro Input Properties tab, ensure the name is descriptive enough. The Name specified here will be visible to the user when they configure the Macro tool.
When there are multiple inputs and outputs, adding a Connector Abbreviation will help the user configure the tool by providing a label on the tool anchor when the tool is placed on the canvas. See Macro Input tool or Macro Output tool.
Tab names should be descriptive for ease of use while the user is configuring the macro tool. Tabs will be visible to the user at configuration time. The default Tab name is ‘Questions’ – not a very descriptive name and this is usually an oversight when developing a macro (or app) with a single tab. See Interface Designer window.
Supporting Macros used in a parent workflow should be present with the parent macro or in a supporting directory and named as such: