Skip to main content

Split Transform

注記

Transforms are a part of the underlying language, which is not directly accessible to users. This content is maintained for reference purposes only. For more information on the user-accessible equivalent to transforms, see Transformation Reference.

Splits the specified column into separate columns of data based on the delimiters in the transform. Delimiters can be specified in a number of literal or pattern-based methods. Whitespace delimiters are supported.

This transform might be automatically applied as one of the first steps of your recipe.

ヒント

When this transform appears in a suggestion card, the maximum number of suggested columns to split is 250, which may prevent the browser from crashing. If your dataset requires additional column splits, you can edit the transformation and increase the maximum number of splits. Avoid creating datasets that are wider than 1000 columns.

When the split transform is applied, the source column is dropped.

  • Before applying this transform, you can create a copy of the source column using the derive transform. See Derive Transform.

  • To retain the source column, you can use the extract transform and pattern-based matching. See Extract Transform.

Basic Usage

split col: MyValues on: ',' limit: 3

Output: Splits the source MyValues column into four separate columns. Values in the columns are determined based on the comma (,) delimiter. If a row only has two commas in it, then the final generated column is null.

Syntax and Parameters

split col:column_ref [quote:'quoted_string'] [ignoreCase:true|false] [limit:int_num] [after:start_point | from: start_point] [before:end_point | to:end_point] [on:'exact_match'] [at:(start_index,end_index)] [delimiters:'string1','string2', 'string3'] [positions: int1,int2,int3] [every:int_num]

For more information on syntax standards, see Language Documentation Syntax Notes.

The split transform supports the following general methods for specifying the delimiters by which to split the column. Depending on your use of the transform, different sets of parameters apply.

Delimiter Methods

Description

Operative Parameters

single-pattern delimiters

Column is split based on one of the following:

1) patterns used to describe the beginning and ending of the field delimiter(s),

2) single delimiter, which may be repeated,

3) index values of the start and end points of the delimiter

quote

At least one of the following parameters must be specified:

after,at,from,before,on,to

multi-pattern delimiters

Column is split based one of the following literal methods:

1) explicit sequence of delimiters,

2) explicit list of character index positions

3) every N characters

At least one of the following parameters must be specified:

delimiters, positions,every

Shared parameters:

The following parameters are shared between the operating modes:

Token

Required?

Data Type

Description

split

Y

transform

Name of the transform

col

Y

string

Source column name

ignoreCase

N

boolean

If true, matching is case-insensitive.

limit

N

integer (positive)

Specifies the maximum of columns to split from the source column

Single-pattern delimiter parameters:

ヒント

For this method of matching, at least one of the following parameters must be used: at, before, from, on, or to.

Token

Required?

Data Type

Description

after

N

string

String literal or pattern that precedes the pattern to match

at

N

Array

Two-integer array identifying the character indexes of start and end characters to match

before

N

string

String literal or pattern that appears after the pattern to match

from

N

string

String literal or pattern that identifies the start of the pattern to match

on

N

string

String literal or pattern that identifies the pattern to match.

to

N

string

String literal or pattern that identifies the end of the pattern to match

quote

N

string

Specifies a quoted object that is omitted from pattern matching

Multi-pattern delimiter parameters:

ヒント

Use one of the following parameters for this method of matching. Do not use combinations of them.

Token

Required?

Data Type

Description

delimiters

N

array

Array of strings that list the explicit field delimiters in the order to apply them to the column.

positions

N

array

Array of integers that identify the zero-based character index values where to split the column.

every

N

integer

String literal or pattern that appears after the pattern to match

col

Identifies the column to which to apply the transform. You can specify only one column.

split col: MyCol on: 'MyString'

Output: Splits the MyCol column into two separate columns whose values are to the left and right of the MyString value in each cell.

  • If a delimiter value is not detected, the cell value appears in the first of the new columns.

  • When the limit parameter is not specified, the default value of 1 is applied.

Usage Notes:

Required?

Data Type

Yes

String (column name)

ignoreCase

Indicates whether the match should ignore case or not.

  • Set to true to ignore case matching.

  • (Default) Set to false to perform case-sensitive matching.

split col: MyCol on: 'My String' ignoreCase: true

Output: Splits the MyCol column on case-insensitive versions of the on parameter value, if they appear in cell values: My String, my string, My string, etc.

Usage Notes:

Required?

Data Type

No

Boolean

limit

The limit parameter defines the maximum number of times that a pattern can be matched within a column.

注記

The limit parameter cannot be used with the following parameters: at, positions, or delimiters.

A set of new columns is generated, as defined by the limit parameter. Each matched instance populates a separate column, until there are no more matches or all of the limit-generated new columns are filled.

split col: MyCol on: 'z' limit: 3

Output: Splits the MyCol column on each instance of the letter z, generating 4 new columns. If there are fewer than 3 instances of z in a cell, the corresponding columns after the split are blank.

注記

Avoid creating datasets that are wider than 2500 columns. Performance can degrade significantly on very wide datasets.

Usage Notes:

Required?

Data Type

No

Integer (positive)

  • Defines the number of columns that can be created by the split transform.

  • If not specified, exactly one column is created. See Pattern Clause Position Matching.

after

A pattern identifier that precedes the value or pattern to match. Define the after parameter value using string literals, regular expressions, or Wrangle .

  • If this parameter is the only pattern describer:

    • The column is split into two. The first column contains the part of the source column before the after matching value. The second column is blank.

    • If the value appears more than once, no additional splitting is made, since there is no other pattern parameter.

      注記

      For after, before, from, and to, matching occurs only one time at most. Additional instances of the parameter's value in the cell do not cause another column split. For more predictable results, you should specify another pattern parameter.

  • If the after value does not appear in the column, the original column value is written to the first split column.

  • This parameter is typically used with another to describe a field delimiting pattern. See below.

split col: MyCol after: '\' before:'|'

Output: Splits values in MyCol based on value between the two characters. The first column contains the part of the MyCol that appears before the backslash (\), and the second column contains the part of MyCol that appears after the pipe character (|). The content between the delimiting characters is dropped.

Usage Notes:

Required?

Data Type

No

String or pattern

  • The after and from parameters are very similar. from includes the matching value as part of the delimiter string.

  • after can be used with either to or before. See Pattern Clause Position Matching.

at

Identifies the start and end point of the pattern to interest.

Parameter inputs are in the form of x,y where x and y are positive integers indicating the starting character and ending character, respectively, of the pattern of interest.

  • x must be less than y.

  • If y is greater than the length of the value, the pattern is defined to the end of the value, and a match is made.

split col: MyCol at: 2,6

Output: Splits the MyCol column on the value that begins at the second character in the column and extends to the sixth character of the column. Contents before the value are in the first column, and contents after the value are in the second column.

Usage Notes:

Required?

Data Type

No

Array of two Integers (X,Y)

The at parameter cannot be combined with any of the following: on, after, before, from, to, and quote. See Pattern Clause Position Matching.

before

A pattern identifier that occurs after the value or pattern to match. Define the pattern using string literals, regular expressions, or Wrangle .

  • If this parameter is the only pattern describer:

    • The column is split into two. The first column is blank. The second column contains the part of the source column after the before matching value.

    • If the value appears more than once, no additional splitting is made, since there is no other pattern parameter.

      注記

      For after, before, from, and to, matching occurs only one time at most. Additional instances of the parameter's value in the cell do not cause another column split. For more predictable results, you should specify another pattern parameter.

  • If the before value does not appear in the column, the original column value is written to the first split column.

  • This parameter is typically used with another to describe a field delimiting pattern. See below.

split col: MyCol before: '/' from:'Go:'

Output: Splits contents of MyCol into two columns. The first column contains the values that appear before the Go: string, and the second column contains the values after the backslash.

Usage Notes:

Required?

Data Type

No

String or pattern

  • The before and to parameters are very similar. to includes the matching value as part of the delimiter string.

  • before can be used with either from or after. See Pattern Clause Position Matching.

from

Identifies the pattern that marks the beginning of the value to match. It can be a string literal, Wrangle , or regular expression. The from value is included in the match.

  • If this parameter is the only pattern describer:

    • The column is split into two. The first column contains the part of the source column before the from matching value. The second column is blank.

    • If the value appears more than once, no additional splitting is made, since there is no other pattern parameter.

      注記

      For after, before, from, and to, matching occurs only one time at most. Additional instances of the parameter's value in the cell do not cause another column split. For more predictable results, you should specify another pattern parameter.

  • If the from value does not appear in the column, the output value is original column value.

  • This parameter is typically used with another to describe a field delimiting pattern. See below.

split col: MyCol from: 'go:' to:'stop:'

Output: Splits contents of MyCol from go:, including go: to stop:, including stop:. Contents before the string appear in the first column, contents after the string appear in the second one.

Usage Notes:

Required?

Data Type

No

String or pattern

  • The after and from parameters are very similar. from includes the matching value as part of the delimiter string.

  • from can be used with either to or before. See Pattern Clause Position Matching.

on

Identifies the pattern to match, which can be a string literal, Wrangle , or regular expression.

If the value does not appear in the source column, the original value is written to the first column of the split columns.

split col: MyCol on: `###ERROR`

Output: Column into two columns. The first column contains values in the column appearing before ###ERROR, and the second column contains the values appearing after this string.

ヒント

You can insert the Unicode equivalent character for this parameter value using a regular expression of the form /\uHHHH/. For example, /\u0013/ represents Unicode character 0013 (carriage return). For more information, see Supported Special Regular Expression Characters.

Usage Notes:

Required?

Data Type

No

String or pattern

to

Identifies the pattern that marks the ending of the value to match. Pattern can be a string literal, Wrangle , or regular expression. The to value is included in the match.

  • If this parameter is the only pattern describer:

    • The column is split into two. The first column is blank. The second column contains the part of the source column after the to matching value.

    • If the value appears more than once, no additional splitting is made, since there is no other pattern parameter.

      注記

      For after, before, from, and to, matching occurs only one time at most. Additional instances of the parameter's value in the cell do not cause another column split. For more predictable results, you should specify another pattern parameter.

  • If the to value does not appear in the column, the original column value is written to the first split column.

  • This parameter is typically used with another to describe a field delimiting pattern. See below.

split col:MyCol from:'note:' to: ` `

Output: Splits MyCol column all contents that appear before note: in the first column and all contents that appear after the first space after note: in the second column.

Usage Notes:

Required?

Data Type

No

String or pattern

  • The before and to parameters are very similar. to includes the matching value as part of the delimiter string.

  • to can be used with either from or after. See Pattern Clause Position Matching.

quote

Can be used to specify a string as a single quoted object. This parameter value can be one or more characters.

split col: MyLog on: `|` limit:10 quote: '"'

Output: Splits the MyLog column, on the pipe character (|), while ignoring any pipe characters that are found between double-quote characters in the column. Based on the value in the limit parameter, the transform is limited to creating a maximum of 10 splits.

Usage Notes:

Required?

Data Type

No

String

  • Parameter value is the quoted object.

  • The quote value can appear anywhere in the column value. It is not limited by the constraints of any other parameters.

delimiters

The delimiters parameter specifies a comma-separated list of string literals or patterns to identify the delimiters to use to split the data. Values can be string literals, regular expressions, or Wrangle .

  • The sequence of values defines the order in which the delimiters are applied.

  • Values do not need to be the same.

split col:myCol delimiters:'|',' ','|'

Output: Splits the myCol column into four separate columns, as indicated by the sequence of delimiters.

Usage Notes:

注記

Do not use the limit or quote parameters with the delimiters parameter.

Required?

Data Type

No

Array of Strings (literal, regular expression,Wrangle)

positions

The positions parameter specifies a comma-separated list of integers that identify zero-based character index values at which to split the column. Values must be Integers.

split col:myCol positions:20,55,80

ヒント

Numeric values for positions do not need to be in sorted order.

Output: Splits the myCol column into four separate columns, where:

  • column1 = characters 0-20 from the source column,

  • column2 = characters 21-55

  • column3 = characters 56-80

  • column4 = characters 80 to the end of the cell value

Usage Notes:

注記

Do not use the limit or quote parameters with the positions parameter.

Required?

Data Type

No

Array of Integers (literal, regular expression,Wrangle)

every

The every parameter can be used to specify fixed-width splitting of the source column. This Integer value defines the number of characters in each column of the split output.

If needed, you can use the every parameter with the limit parameter to define the maximum number of output columns:

split col:myCol every:20 limit:5

Output: Splits the myCol column every 20 characters, with a limit of five splits. The sixth column contains all characters after the 100th character in the cell value.

Usage Notes:

Required?

Data Type

No

Integer

Pattern Groups

When you build or edit a split transform step in the Transform Builder, you can select one of the following pattern groups to apply to your transform. A pattern group is a set of related patterns that define a method of matching in a cell's data. Some pattern groups apply to multiple transforms, and some apply to the split transform only.

Examples

ヒント

For additional examples, see Common Tasks.

Example - Split with single pattern delimiters

Source:

ColA

ColB

ColC

This my String That

abXcdXefXgh

01AA001

my string This That

ijXklXmnXop

02BB002

This That My String

qrXstXuvXwy

03CC003

Transformation:

ColA: You can use the following transformation to split on the variations of My String: In this case, the ignoreCase parameter ensures that all variations on capitalization are matched:

Transformation Name

Split column

Parameter: Column

ColA

Parameter: Option

On pattern

Parameter: Match pattern

'My String'

Parameter: Ignore case

true

ColB: For this column, the letter x is the split marker, and the data is consistently formatted with three instances per row:

Transformation Name

Split column

Parameter: Column

ColB

Parameter: Option

On pattern

Parameter: Match pattern

'X'

Parameter: Number of matches

3

ColC: In this column, the double-letter marker varies between the rows. However, it is consistently in the same location in each row:

Transformation Name

Split column

Parameter: Column

ColC

Parameter: Option

Sequence of positions

Parameter: Positions

2,4

Results:

When the above transforms are added, the source columns are dropped, leaving the following columns:

ColA1

ColA2

ColB1

ColB2

ColB3

ColB4

ColC1

ColC2

This

That

ab

cd

ef

gh

01

001

This That

ij

kl

mn

op

02

002

This That

qr

st

uv

wy

03

003

Example - Split with quoted values

This example demonstrates how to use quote parameter for more sophisticated splitting of columns of data using the split transform.

Source:

In this example, the following CSV data, which contains contact information, is imported into the application:

LastName,FirstName,Role,Company,Address,Status
Wagner,Melody,VP of Engineering,Example.com,"123 Main Street, Oakland, CA 94601",Prospect
Gruber,Hans,"Director, IT",Example.com,"456 Broadway, Burlingame, CA, 94401",Customer
Franks,Mandy,"Sr. Manager, Analytics",Tricorp,"789 Market Street, San Francisco, CA, 94105",Customer

Transformationn:

When this data is pulled into the application, some initial parsing is performed for you:

column2

column3

column4

column5

column6

column7

LastName

FirstName

Role

Company

Address

Status

Wagner

Melody

VP of Engineering

Example.com

"123 Main Street, Oakland, CA 94601"

Prospect

Gruber

Hans

"Director, IT"

Example.com

"456 Broadway, Burlingame, CA, 94401"

Customer

Franks

Mandy

"Sr. Manager, Analytics"

Tricorp

"789 Market Street, San Francisco, CA, 94105"

Customer

When you open the Recipe Panel, you should see the following transforms:

Transformation Name

Split into rows

Parameter: Column

column1

Parameter: Split on

\n

Parameter: Ignore matches between

\"

Parameter: Quote escape character

\"

Transformation Name

Split column

Parameter: Column

column1

Parameter: Option

On pattern

Parameter: Match pattern

','

Parameter: Number of Matches

5

Parameter: Ignore matches between

\"

The first transform splits the raw source data into separate rows in the carriage return character (\r), ignoring all values between the double-quote characters. Note that this value must be escaped. The double-quote character does not require escaping. While there are no carriage returns within the actual data, the application recognizes that these double-quotes are identifying single values and adds the quote value.

The second transform splits each row of data into separate columns. Since it is comma-separated data, the application recognizes that this value is the column delimiter, so the on value is set to the comma character (,). In this case, the quoting is necessary, as there are commas in the values in column4 and column6, which are easy to clean up.

To finish clean up of the dataset, you can promote the first row to be your column headers:

Transformation Name

Rename column with row(s)

Parameter: Option

Use row(s) as column names

Parameter: Type

Use a single row to name columns

Parameter: Row number

1

You can remove the quotes now. Note that the following applies to two columns:

Transformation Name

Replace text or patterns

Parameter: Column

Address,Role

Parameter: Find

'\"'

Parameter: Replace

''

Parameter: Match all occurrences

true

Now, you can split up the Address column. You can highlight one of the commas and the space after it in the column, but make sure that your final statement looks like the following:

Transformation Name

Split column

Parameter: Column

column1

Parameter: Option

On pattern

Parameter: Match pattern

','

Parameter: Number of Matches

2

Notice that there is some dirtiness to the resulting Address3 column:

Address3

CA 94601

CA, 94401

CA, 94105

Use the following to remove the comma. In this case, it's important to leave the space between the two values in the column, so the on value should only be a comma. Below, the width value is two single quotes:

Transformation Name

Replace text or patterns

Parameter: Column

Address3

Parameter: Find

','

Parameter: Replace

''

Parameter: Match all occurrences

true

You can now split the Address3 column on the space delimiter:

Transformation Name

Split by delimiter

Parameter: Column

Address3

Parameter: Option

by delimiter

Parameter: Delimiter

' '

Parameter: Number of columns to create

2

Results:

After you rename the columns, you should see the following:

LastName

FirstName

Role

Company

Address

City

State

Zipcode

Status

Wagner

Melody

VP of Engineering

Example.com

123 Main Street

Oakland

CA

94601

Prospect

Gruber

Hans

Director, IT

Example.com

456 Broadway

Burlingame

CA

94401

Customer

Franks

Mandy

Sr. Manager, Analytics

Tricorp

789 Market Street

San Francisco

CA

94105

Customer

Example - Splitting with different delimiter types

This example shows how you can split data from a single column into multiple columns using delimiters.

  • single-pattern delimiter: One pattern is applied one or more times to the source column to define the delimiters for the output columns

  • multi-pattern delimiter: Multiple patterns, in the form of explicit strings, character index positions, or fixed-width fields, are used to split the column.

Source:

In this example, your CSV dataset contains status messages from a set of servers. In this case, the data about the server and the timestamp is contained in a single value within the CSV.

Server|Date Time,Status
admin.examplecom|2016-03-05 07:04:00,down
webapp.examplecom|2016-03-05 07:04:00,ok
admin.examplecom|2016-03-05 07:04:30,rebooting
webapp.examplecom|2016-03-05 07:04:00,ok
admin.examplecom|2016-03-05 07:05:00,ok
webapp.examplecom|2016-03-05 07:05:00,ok

Transformation:

When the data is first loaded into the Transformer page, the CSV data is split using the following two transformations:

Transformation Name

Split into rows

Parameter: Column

column1

Parameter: Split on

\n

Transformation Name

Split column

Parameter: Column

column1

Parameter: Option

On pattern

Parameter: Match pattern

','

Parameter: Ignore matches between

\"

You might need to add a header as the first step:

Transformation Name

Rename column with row(s)

Parameter: Option

Use row(s) as column names

Parameter: Type

Use a single row to name columns

Parameter: Row number

1

At this point, your data should look like the following:

Server_Date_Time

Status

admin.example.com|2016-03-05 07:04:00

down

webapp.example.com|2016-03-05 07:04:00

ok

admin.example.com|2016-03-05 07:04:30

rebooting

webapp.example.com|2016-03-05 07:04:30

ok

admin.example.com|2016-03-05 07:05:00

ok

webapp.example.com|2016-03-05 07:05:00

ok

The first column contains three distinct sets of data: the server name, the date, and the time. Note that the delimiters between these fields are different, so you should use a multi-pattern delimiter to break them apart:

Transformation Name

Split column

Parameter: Column

Server|Date Time

Parameter: Option

Sequence of patterns

Parameter: Pattern1

','

Parameter: Pattern2

' '

When the above is added, you should see three separate columns with the individual fields of information. Note that the source column has been automatically dropped.

Now, you decide that it would be useful to break apart the date information column into separate columns for year, month, and day. Since the column delimiter of this field is consistently a dash (-), you can use a single-pattern delimiter with the following transformation:

Transformation Name

Split by delimiter

Parameter: Column

Server|Date Time2

Parameter: Option

By delimiter

Parameter: Delimiter

'-'

Parameter: Number of columns to create

2

Results:

After you rename the generated columns, your dataset should look like the following. Note that the source timestamp column has been automatically dropped.

server

year

month

day

time

Status

admin.example.com

2016

03

05

07:04:00

down

webapp.example.com

2016

03

05

07:04:00

ok

admin.example.com

2016

03

05

07:04:30

rebooting

webapp.example.com

2016

03

05

07:04:30

ok

admin.example.com

2016

03

05

07:05:00

ok

webapp.example.com

2016

03

05

07:05:00

ok