Skip to main content

Replace Values Using Patterns

Alteryx patterns enable you to identify patterns in cell values and to perform replacements on those found elements of text. This section describes how to use patterns to find text and replace them with preferred values.

Suggerimento

Patterns can also be used to extract values from cell values into a new column. The Alteryx patterns listed on this page can also be applied to the Extract text or pattern transformation. For additional example Alteryx patterns, see Extract Values.

Replace Methods

You can use the Replace text or patterns transformation to replace values in one or more columns with literal values, Alteryx patterns, or regular expressions through any of the following methods. You can use this transformation to replace missing, mismatched, or bad data using the following methods.

Replace by selection

When you select a piece of text in the data grid, the replace suggestion card displayed in the Selection Details panel on the right side may contain Pattern-based options for finding the selected value and similar values in the column of data. You can use these suggestions to replace column values.

Steps:

  1. Select the data you want to replace. The suggestion cards are displayed.

  2. In the Selection Details panel on the right side, select the Replace pattern suggestion card and click Edit.

  3. The Replace text or patterns transformation is specified for you in the Transform Builder, where you can modify the Find value and other parameters as needed. See example below.

Replace using Transformer toolbar

In the Transformer toolbar at the top of the grid, clickReplace > Text or Pattern. The Replace text or pattern transformation is displayed in the Transform Builder. For more information, see Transformer Toolbar.

For more information on procedures, see "Replace using Transform Builder" below.

Replace using Column Details panel

You can review sets of patterns for the selected column in the Column Details panel. When you select a column in the Column Details panel, you are prompted with a set of suggested patterns.

For more information on suggestions, see Overview of Predictive Transformation.

Replace using Transform Builder

When a pattern suggestion is selected, it is specified in the Transform Builder for review and addition to your recipe. In the Transform Builder, you can select one or more columns to replace text or patterns.

Steps:

The following steps describe how to build a pattern-based replacement transformation from scratch in the Transform Builder.

Suggerimento

Some selections in the data grid or related tools can lead to suggestions or pre-configured transformations in the Transform Builder.

  1. Enter Replace text or pattern in the Search panel.

  2. Select an individual column or multiple columns from the following options:

    • Multiple: Select one or more columns from the drop-down list.

    • All: Select all columns in the dataset. See below for an example.

    • Range: Specify a start column and an ending column. All columns in between are selected.

    • Advanced: Specify the columns using a comma-separated list. You can combine multiple and range options under Advanced.

      • Ranges of columns can be specified using the tilde (~) character.

      • The following example range selects from the dataset as displayed in the data grid column1, column3, and the range of columns between column5 and column8, inclusive:

        column1,column3,column5~column8

  3. In the Find text box, enter the text value or pattern that matches the value you want to replace. For more information, see "Find Values in a Column" below.

  4. In the Replace text box, enter the value to replace the found text.

  5. For additional controls, click AdvancedOptions:

    1. Start search after: Enter a text or pattern that precedes the value you want to replace. See below example.

    2. Start search before: Enter a text or pattern that follows the value you want to replace. See below example.

    3. Ignore case: If selected, case is ignored when matching.

    4. Match all occurrences: If selected, all occurrences of the found text in the column are matched and replaced.

  6. Click Add. The transformation is added to your recipe, and the selected columns are replaced with appropriate patterns in the data grid.

Find Values in a Column

The Replace with text or pattern transformation enables you to replace values within the specified column or columns based on a string literal or Alteryx patterns. When you specify the transformation in the Transform Builder, the Find textbox can be populated with one of the following types of values:

Find type

Description

Delimiter

Example

Literal

A literal pieces of text

single quotes

'My piece of text'

Alteryx pattern

A Alteryx pattern represents zero or more characters that match a pattern. In Designer Cloud, Patterns are a simplified means of expressing regular expressions. For more information on Alteryx pattern syntax, see Text Matching.

Suggerimento

The examples in this section use Alteryx Patterns, which are simpler to use than regular expressions.

back-ticks

`{start}{digit}{3}`

Regular expression

Regular expressions are a standard-based method of describing patterns in values.

Nota

Regular expressions are considered a developer-level skill. For more information on regular expression, see on RE2 and PCRE regular expressions.

forward slashes

/^.{<span class="hljs-number">0</span>,<span class="hljs-number">3</span>}/

Examples

The following examples demonstrate how Alteryx Patterns can be used to find and replace values within a column or set of columns.

Replace first three characters

This example uses Alteryx Pattern to find the first three characters. In this example, the first three characters of the Customer ID column are replaced with the value CustID- for the selected column in the dataset.

Transformation:

Transformation Name

Replace text or patterns

Parameter: Column

CustomerID

Parameter: Find

`{start}%{3}`

Parameter: Replace with

CustID-

Results:

Before

After

Tri02468
CustID-02468
Mul2239
CustID-2239
Zev5521
CustID-5521

Replace using literal expressions

This example is based on the search and replace content in your dataset using literals. In the following example, the value ##CLT_NAME## is replaced with Our Customer, Inc. across all columns in the dataset.

Transformation:

Transformation Name

Replace text or patterns

Parameter: Column

All

Parameter: Find

'##CLT_NAME##'

Parameter: Replace with

'Our Customer, Inc.'

Parameter: Match all occurrences

true

Replace string of four digits

Suggerimento

For privacy reasons or sensitivity reasons, you can mask the sensitive data with the following replacements.

The following example uses Alteryx Patterns to find a string of four digits. The replacement is based on the structure of the data, not on the type of data. If you have data that are not credit card numbers yet follows the four-digit pattern, those values can also be replaced. In this example, the myCreditCardNumbers column is masked with XXXX.

Transformation:

Transformation Name

Replace text or patterns

Parameter: Columns

myCreditCardNumbers

Parameter: Find

`{start}{digit}{4}{any}{digit}{4}{any}{digit}{4}{any}({digit}{4}){end}`

Parameter: Replace with

XXXX-XXXX-XXXX-$1

Results:

Before

After

1234-1234-1234-1234
XXXX-XXXX-XXXX-1234
1111-1111-1111-1111
XXXX-XXXX-XXXX-1111
4321-4321-4321-4321
XXXX-XXXX-XXXX-4321

Using capture groups

The previous example captures aspects of the found pattern for use during replacement. A capture group is a mechanism in Alteryx Patterns or regular expressions to capture one or more parts of the matched values into variables.

In the example, the last four-digit segment of the Alteryx Pattern is surrounded by parentheses:

({digit}{4}){end}

This group of digits is captured as the first (and only) capture group. In the replacement string, it is referenced as:

$1

You can have multiple capture groups in a single pattern. In the replacement, these capture groups can be referenced sequentially left-to-right from the pattern: $1, $2, and so on.

For more information, see Capture Group References.

Suggerimento

You can use both {digit} and {#}Alteryx patterns for columns containing numeric values.

Replace date and time patterns

The following example is based on replacing the date and time using the pre-configured suggestions displayed in the search context panel. In this example, the date Alteryx Patterns yy/mm/dd is replaced with mm/dd/yy.

Transformation:

Transformation Name

Replace text or patterns

Parameter: Column

ORDER_DATE

Parameter: Find

`({yy}){delim}({MM}){delim}({dd})`

Parameter: Replace with

$2-$1-$3

Results:

Before

After

20/11/02
11/02/20
20/11/22
11/22/20
20/11/26
11/26/20

Replace based on position

You can specify replacements based on the character position of values in your source column values. This method of finding and replacing values is useful if the source column data is consistently structured.

For example, suppose you have dates in the following format:

Before

2020-05-01

2020-05-02

2020-05-03

Transformation:

Suppose you wanted to replace the value for the month with Month, you could add the following transformation step:

Transformation Name

Replace between positions

Parameter: Column

Before

Parameter: Start position

6

Parameter: End position

8

Parameter: Replace with

Month

Results:

After

2020-Month-01

2020-Month-02

2020-Month-03

To replace the four digits of the year, you could perform a basic replace text or pattern transformation with a pattern to find of the following:

`{start}{digit}{4}`

Replace alpha-numeric and position patterns

You can use alpha-numeric and position Alteryx patterns for replacing the customer's address in the the dataset. In this example, {alpha-numeric} pattern is applied to find the customer's addresses and used {start} and {end} pattern to mention the position of replacement. For more information on Pattern Syntax, see Text Matching.

Transformation:

Transformation Name

Replace text or patterns

Parameter: Column

address_street_number

Parameter: Find

`{alpha-numeric}`

Parameter: Replace with

##

Parameter: Start search after

`{start}{digit}{2}`

Parameter: Stop search before

`{any}`

Results:

Before

After

3298, Church Street
32##, Church Street
4132, Park Avenue
41##, Park Avenue
1234, McGrath Road
12##, McGrath Road

Replace using special patterns

You can use the following special Alteryx Pattern tokens to search for matches in your source values. In some cases, these Alteryx Patterns are consistent with the patterns used for specific data types.

Pattern

Description

`{at-username}`

Matches values that begin with an at-sign, such as @trifacta. This Alteryx Pattern can be useful if you need to remap or mask username values.

`{hashtag}`

Matches values that begin with a hashtag, such as #dataprep. For an example of this Alteryx Pattern, see Extract Values.

`{hex}`

Matches values that are valid hexadecimal (base-16) numbers. These values contain a string of numerals, letters A-F, and combinations of them, without spaces. Examples: AE00, 1F2F, 100.

`{phone}`

Matches valid phone numbers within a set of values. For more information on this data type pattern, see Phone Number Data Type.

`{email}`

Matches valid email addresses within a set of values. For more information on this data type pattern, see Email Address Data Type.

`{url}`

Matches valid URL addresses within a set of values. For more information, on this data type pattern, see URL Data Type.

In questa sezione: